Efficient Speedstream 5260
What is the SpeedStream 5260?
SYS
State
Description
No Light
No power
Red
The modem is unable to connect. Check the System Status to determine if you can resolve the issue.
Yellow
The modem is attempting to connect.
Steady Green
Power is ON
ATM
State
Description
No Light
Modem power off. Either turn it on and try
to re-connect or follow the steps to troubleshoot
the connection issue.
Red
This indicates a communication failure. Check
the System Status.
Green Blinking
This indicates traffic flow on the WAN interface
Green (Solid)
Modem is ready to communicate. Try some other
troubleshooting steps if you are unable to connect.
DSL
State
Description
No Light
Either turn it on and try to re-connect or follow the steps to troubleshoot the connection issue.
Red
This indicates a configuration failure. Check your DSL software configuration or your LAN settings.
Yellow
This indicates a communication problem. Troubleshoot the connection.
Blinking Green / Yellow
The modem is attempting to connect.
Blinking Green
The modem is attempting to connect.
Green (Solid)
The modem and L O C L .net are connected and the data is transmitting at a normal rate.
ENET
State
Description
No Light
An Ethernet link was not detected. Verify
NIC connection.
Red
This indicates a communication failure.
Blinking Green
Ethernet traffic flow is normal.
Green (Solid)
Ethernet ready.
Lights for a SpeadStream 5260
